Template::Manual::Filters - Standard filters
The 'format' filter takes a format string as a parameter (as per printf()) and formats each line of text accordingly.
[% FILTER format('<!-- %-40s -->') %]
This is a block of text filtered
through the above format.
[% END %]
output:
<!-- This is a block of text filtered -->
<!-- through the above format. -->
Folds the input to UPPER CASE.
[% "hello world" FILTER upper %]
output:
HELLO WORLD
Folds the input to lower case.
[% "Hello World" FILTER lower %]
output:
hello world
Folds the first character of the input to UPPER CASE.
[% "hello" FILTER ucfirst %]
output:
Hello
Folds the first character of the input to lower case.
[% "HELLO" FILTER lcfirst %]
output:
hELLO
Trims any leading or trailing whitespace from the input text. Particularly useful in conjunction with INCLUDE, PROCESS, etc., having the same effect as the TRIM configuration option.
[% INCLUDE myfile | trim %]
Collapse any whitespace sequences in the input text into a single space. Leading and trailing whitespace (which would be reduced to a single space) is removed, as per trim.
[% FILTER collapse %]
The cat
sat on
the mat
[% END %]
output:
The cat sat on the mat
Converts the characters '<', '>', '&' and '"' to '<', '>', '&', and '"' respectively, protecting them from being interpreted as representing HTML tags or entities.
[% FILTER html %]
Binary "<=>" returns -1, 0, or 1 depending on...
[% END %]
output:
Binary "<=>" returns -1, 0, or 1 depending on...
The html filter is fast and simple but it doesn't encode the full range of HTML entities that your text may contain. The html_entity filter uses either the Apache::Util module (which is written in C and is therefore faster) or the HTML::Entities module (written in Perl but equally as comprehensive) to perform the encoding. If one or other of these modules are installed on your system then the text will be encoded (via the escape_html() or encode_entities() subroutines respectively) to convert all extended characters into their appropriate HTML entities (e.g. converting 'é' to 'é'). If neither module is available on your system then an 'html_entity' exception will be thrown reporting an appropriate message.
For further information on HTML entity encoding, see http://www.w3.org/TR/REC-html40/sgml/entities.html.
This filter formats a block of text into HTML paragraphs. A sequence of two or more newlines is used as the delimiter for paragraphs which are then wrapped in HTML <p>...</p> tags.
[% FILTER html_para %]
The cat sat on the mat.
Mary had a little lamb.
[% END %]
output:
<p>
The cat sat on the mat.
</p>
<p>
Mary had a little lamb.
</p>
Similar to the html_para filter described above, but uses the HTML tag sequence <br><br> to join paragraphs.
[% FILTER html_break %]
The cat sat on the mat.
Mary had a little lamb.
[% END %]
output:
The cat sat on the mat.
<br>
<br>
Mary had a little lamb.
This filter replaces any newlines with <br> HTML tags, thus preserving the line breaks of the original text in the HTML output.
[% FILTER html_line_break %]
The cat sat on the mat.
Mary had a little lamb.
[% END %]
output:
The cat sat on the mat.<br>
Mary had a little lamb.<br>
This filter URI escapes the input text, converting any characters
outside of the permitted URI character set (as defined by RFC 2396)
into a %nn hex escape.
[% 'my file.html' | uri %]
output:
my%20file.html
The uri filter correctly encodes all reserved characters, including
&, @, /, ;, :, =, +, ? and $. This filter
is typically used to encode parameters in a URL that could otherwise
be interpreted as part of the URL. Here's an example:
[% path = 'http://tt2.org/example'
back = '/other?foo=bar&baz=bam'
title = 'Earth: "Mostly Harmless"'
%]
<a href="[% path %]?back=[% back | uri %]&title=[% title | uri %]">
The output generated is rather long so we'll show it split across two lines:
<a href="http://tt2.org/example?back=%2Fother%3Ffoo%3Dbar%26
baz%3Dbam&title=Earth%3A%20%22Mostly%20Harmless%22">
Without the uri filter the output would look like this (also split across two lines).
<a href="http://tt2.org/example?back=/other?foo=bar
&baz=bam&title=Earth: "Mostly Harmless"">
In this rather contrived example we've manage to generate both a broken URL
(the repeated ? is not allowed) and a broken HTML element (the href
attribute is terminated by the first " after Earth: leaving Mostly
Harmless" dangling on the end of the tag in precisely the way that harmless
things shouldn't dangle). So don't do that. Always use the uri filter to
encode your URL parameters.
However, you should not use the uri filter to encode an entire URL.
<a href="[% page_url | uri %]"> # WRONG!
This will incorrectly encode any reserved characters like : and /
and that's almost certainly not what you want in this case. Instead
you should use the url (note spelling) filter for this purpose.
<a href="[% page_url | url %]"> # CORRECT
Please note that this behaviour was changed in version 2.16 of the Template Toolkit. Prior to that, the uri filter did not encode the reserved characters, making it technically incorrect according to the RFC 2396 specification. So we fixed it in 2.16 and provided the url filter to implement the old behaviour of not encoding reserved characters.
The url filter is a less aggressive version of the uri filter. It encodes
any characters outside of the permitted URI character set (as defined by RFC 2396)
into %nn hex escapes. However, unlike the uri filter, the url filter does
not encode the reserved characters &, @, /, ;, :, =, +,
? and $.
Indents the text block by a fixed pad string or width. The 'pad' argument can be specified as a string, or as a numerical value to indicate a pad width (spaces). Defaults to 4 spaces if unspecified.
[% FILTER indent('ME> ') %]
blah blah blah
cabbages, rhubard, onions
[% END %]
output:
ME> blah blah blah
ME> cabbages, rhubard, onions
Truncates the text block to the length specified, or a default length of 32. Truncated text will be terminated with '...' (i.e. the '...' falls inside the required length, rather than appending to it).
[% FILTER truncate(21) %]
I have much to say on this matter that has previously
been said on more than one occasion.
[% END %]
output:
I have much to say...
If you want to use something other than '...' you can pass that as a second argument.
[% FILTER truncate(26, '…') %]
I have much to say on this matter that has previously
been said on more than one occasion.
[% END %]
output:
I have much to say…
Repeats the text block for as many iterations as are specified (default: 1).
[% FILTER repeat(3) %]
We want more beer and we want more beer,
[% END %]
We are the more beer wanters!
output:
We want more beer and we want more beer,
We want more beer and we want more beer,
We want more beer and we want more beer,
We are the more beer wanters!
Searches the input text for any occurrences of the specified string and removes them. A Perl regular expression may be specified as the search string.
[% "The cat sat on the mat" FILTER remove('\s+') %]
output:
Thecatsatonthemat
Similar to the remove filter described above, but taking a second parameter which is used as a replacement string for instances of the search string.
[% "The cat sat on the mat" | replace('\s+', '_') %]
output:
The_cat_sat_on_the_mat
The 'redirect' filter redirects the output of the block into a separate file, specified relative to the OUTPUT_PATH configuration item.
[% FOREACH user = myorg.userlist %]
[% FILTER redirect("users/${user.id}.html") %]
[% INCLUDE userinfo %]
[% END %]
[% END %]
or more succinctly, using side-effect notation:
[% INCLUDE userinfo
FILTER redirect("users/${user.id}.html")
FOREACH user = myorg.userlist
%]
A 'file' exception will be thrown if the OUTPUT_PATH option is undefined.
An optional 'binmode' argument can follow the filename to explicitly set the output file to binary mode.
[% PROCESS my/png/generator
FILTER redirect("images/logo.png", binmode=1) %]
For backwards compatibility with earlier versions, a single true/false value can be used to set binary mode.
[% PROCESS my/png/generator
FILTER redirect("images/logo.png", 1) %]
For the sake of future compatibility and clarity, if nothing else, we would strongly recommend you explicitly use the named 'binmode' option as shown in the first example.
The 'eval' filter evaluates the block as template text, processing any directives embedded within it. This allows template variables to contain template fragments, or for some method to be provided for returning template fragments from an external source such as a database, which can then be processed in the template as required.
my $vars = {
fragment => "The cat sat on the [% place %]",
};
$template->process($file, $vars);
The following example:
[% fragment | eval %]
is therefore equivalent to
The cat sat on the [% place %]
The 'evaltt' filter is provided as an alias for 'eval'.
The 'perl' filter evaluates the block as Perl code. The EVAL_PERL option must be set to a true value or a 'perl' exception will be thrown.
[% my_perl_code | perl %]
In most cases, the [% PERL %] ... [% END %] block should suffice for evaluating Perl code, given that template directives are processed before being evaluate as Perl. Thus, the previous example could have been written in the more verbose form:
[% PERL %]
[% my_perl_code %]
[% END %]
as well as
[% FILTER perl %]
[% my_perl_code %]
[% END %]
The 'evalperl' filter is provided as an alias for 'perl' for backwards compatibility.
The stdout filter prints the output generated by the enclosing block to STDOUT. The 'binmode' option can be passed as either a named parameter or a single argument to set STDOUT to binary mode (see the binmode perl function).
[% PROCESS something/cool
FILTER stdout(binmode=1) # recommended %]
[% PROCESS something/cool
FILTER stdout(1) # alternate %]
The stdout filter can be used to force binmode on STDOUT, or also inside redirect, null or stderr blocks to make sure that particular output goes to stdout. See the null filter below for an example.
The stderr filter prints the output generated by the enclosing block to STDERR.
The null filter prints nothing. This is useful for plugins whose methods return values that you don't want to appear in the output. Rather than assigning every plugin method call to a dummy variable to silence it, you can wrap the block in a null filter:
[% FILTER null;
USE im = GD.Image(100,100);
black = im.colorAllocate(0, 0, 0);
red = im.colorAllocate(255,0, 0);
blue = im.colorAllocate(0, 0, 255);
im.arc(50,50,95,75,0,360,blue);
im.fill(50,50,red);
im.png | stdout(1);
END;
-%]
Notice the use of the stdout filter to ensure that a particular expression generates output to stdout (in this case in binary mode).
The latex() filter is no longer part of the core Template Toolkit distribution as of version 2.15. You can download it as a separate Template-Latex distribution from CPAN.
Andy Wardley <abw@wardley.org>
Template Toolkit version 2.19, released on 27 April 2007.
Copyright (C) 1996-2007 Andy Wardley. All Rights Reserved.
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.