Tk::Canvas - Create and manipulate Canvas widgets
$canvas = $parent->Canvas(?options?);
-background -highlightthickness -insertwidth -state
-borderwidth -insertbackground -relief -tile
-cursor -insertborderwidth -selectbackground -takefocus
-highlightbackground -insertofftime -selectborderwidth -xscrollcommand
-highlightcolor -insertontime -selectforeground -yscrollcommand
- Name: closeEnough
-
- Class: CloseEnough
-
- Switch: -closeenough
-
Specifies a floating-point value indicating how close the mouse cursor
must be to an item before it is considered to be ``inside'' the item.
Defaults to 1.0.
- Name: confine
-
- Class: Confine
-
- Switch: -confine
-
Specifies a boolean value that indicates whether or not it should be
allowable to set the canvas's view outside the region defined by the
scrollRegion argument.
Defaults to true, which means that the view will
be constrained within the scroll region.
- Name: height
-
- Class: Height
-
- Switch: -height
-
Specifies a desired window height that the canvas widget should request from
its geometry manager. The value may be specified in any
of the forms described in the "COORDINATES" section below.
- Name: scrollRegion
-
- Class: ScrollRegion
-
- Switch: -scrollregion
-
Specifies a list with four coordinates describing the left, top, right, and
bottom coordinates of a rectangular region.
This region is used for scrolling purposes and is considered to be
the boundary of the information in the canvas.
Each of the coordinates may be specified
in any of the forms given in the "COORDINATES" section below.
- Name: state
-
- Class: State
-
- Switch: -state
-
Modifies the default state of the canvas where state may be set to one of:
normal, disabled, or hidden. Individual canvas objects all have their own
state option, which overrides the default state. Many options can take
separate specifications such that the appearance of the item can be different
in different situations. The options that start with "active" control the
appearence when the mouse pointer is over it, while the option starting
with "disabled" controls the appearence when the state is disabled.
- Name: width
-
- Class: width
-
- Switch: -width
-
Specifies a desired window width that the canvas widget should request from
its geometry manager. The value may be specified in any
of the forms described in the "COORDINATES" section below.
- Name: xScrollIncrement
-
- Class: ScrollIncrement
-
- Switch: -xscrollincrement
-
Specifies an increment for horizontal scrolling, in any of the usual forms
permitted for screen distances. If the value of this option is greater
than zero, the horizontal view in the window will be constrained so that
the canvas x coordinate at the left edge of the window is always an even
multiple of xScrollIncrement; furthermore, the units for scrolling
(e.g., the change in view when the left and right arrows of a scrollbar
are selected) will also be xScrollIncrement. If the value of
this option is less than or equal to zero, then horizontal scrolling
is unconstrained.
- Name: yScrollIncrement
-
- Class: ScrollIncrement
-
- Switch: -yscrollincrement
-
Specifies an increment for vertical scrolling, in any of the usual forms
permitted for screen distances. If the value of this option is greater
than zero, the vertical view in the window will be constrained so that
the canvas y coordinate at the top edge of the window is always an even
multiple of yScrollIncrement; furthermore, the units for scrolling
(e.g., the change in view when the top and bottom arrows of a scrollbar
are selected) will also be yScrollIncrement. If the value of
this option is less than or equal to zero, then vertical scrolling
is unconstrained.
The Canvas method creates a new window (given
by the $canvas argument) and makes it into a canvas widget.
Additional options, described above, may be specified on the
command line or in the option database
to configure aspects of the canvas such as its colors and 3-D relief.
The canvas command returns its
$canvas argument. At the time this command is invoked,
there must not exist a window named $canvas, but
$canvas's parent must exist.
Canvas widgets implement structured graphics.
A canvas displays any number of items, which may be things like
rectangles, circles, lines, and text.
Items may be manipulated (e.g. moved or re-colored) and
callbacks may
be associated with items in much the same way that the bind
method allows callbacks to be bound to widgets. For example,
a particular callback may be associated with the <Button-1> event
so that the callback is invoked whenever button 1 is pressed with
the mouse cursor over an item.
This means that items in a canvas can have behaviors defined by
the Callbacks bound to them.
The items in a canvas are ordered for purposes of display,
with the first item in the display list being displayed
first, followed by the next item in the list, and so on.
Items later in the display list obscure those that are
earlier in the display list and are sometimes referred to
as being ``on top'' of earlier items.
When a new item is created it is placed at the end of the
display list, on top of everything else.
Widget methods may be used to re-arrange the order of the
display list.
Window items are an exception to the above rules. The underlying
window systems require them always to be drawn on top of other items.
In addition, the stacking order of window items
is not affected by any of the canvas methods; you must use
the raise and lower Tk widget methods instead.
Items in a canvas widget may be named in either of two ways:
by id or by tag.
Each item has a unique identifying number which is assigned to
that item when it is created. The id of an item never changes
and id numbers are never re-used within the lifetime of a
canvas widget.
Each item may also have any number of tags associated
with it. A tag is just a string of characters, and it may
take any form except that of an integer.
For example, ``x123'' is OK but ``123'' isn't.
The same tag may be associated with many different items.
This is commonly done to group items in various interesting
ways; for example, all selected items might be given the
tag ``selected''.
The tag all is implicitly associated with every item
in the canvas; it may be used to invoke operations on
all the items in the canvas.
The tag current is managed automatically by Tk;
it applies to the current item, which is the
topmost item whose drawn area covers the position of
the mouse cursor.
If the mouse is not in the canvas widget or is not over
an item, then no item has the current tag.
When specifying items in canvas methods, if the
specifier is an integer then it is assumed to refer to
the single item with that id.
If the specifier is not an integer, then it is assumed to
refer to all of the items in the canvas that have a tag
matching the specifier.
The symbol tagOrId is used below to indicate that
an argument specifies either an id that selects a single
item or a tag that selects zero or more items.
tagOrId may contain a logical expressions of
tags by using operators: '&&', '||', '^' '!', and parenthezised
subexpressions. For example:
$c->find('withtag', '(a&&!b)|(!a&&b)');
or equivalently:
$c->find('withtag', 'a^b');
will find only those items with either "a" or "b" tags, but not both.
Some methods only operate on a single item at a
time; if tagOrId is specified in a way that
names multiple items, then the normal behavior is for
the methods is to use the first (lowest) of these items in
the display list that is suitable for the method.
Exceptions are noted in the method descriptions
below.
All coordinates related to canvases are stored as floating-point
numbers.
Coordinates and distances are specified in screen units,
which are floating-point numbers optionally followed
by one of several letters.
If no letter is supplied then the distance is in pixels.
If the letter is m then the distance is in millimeters on
the screen; if it is c then the distance is in centimeters;
i means inches, and p means printers points (1/72 inch).
Larger y-coordinates refer to points lower on the screen; larger
x-coordinates refer to points farther to the right.
Normally the origin of the canvas coordinate system is at the
upper-left corner of the window containing the canvas.
It is possible to adjust the origin of the canvas
coordinate system relative to the origin of the window using the
xview and yview methods; this is typically used
for scrolling.
Canvases do not support scaling or rotation of the canvas coordinate
system relative to the window coordinate system.
Individual items may be moved or scaled using methods
described below, but they may not be rotated.
Text items support the notion of an index for identifying
particular positions within the item.
Indices are used for methods such as inserting text, deleting
a range of characters, and setting the insertion cursor position.
An index may be specified in any of a number of ways, and
different types of items may support different forms for
specifying indices.
In a similar fashion, line and polygon items support index for
identifying, inserting and deleting subsets of their coordinates.
Indices are used for commands such as inserting or deleting
a range of characters or coordinates, and setting the insertion
cursor position. An index may be specified in any of a number
of ways, and different types of items may support different forms
for specifying indices.
Text items support the following forms for an index; if you
define new types of text-like items, it would be advisable to
support as many of these forms as practical.
Note that it is possible to refer to the character just after
the last one in the text item; this is necessary for such
tasks as inserting new text at the end of the item.
Lines and Polygons don't support the insertion cursor
and the selection. Their indices are supposed to be even
always, because coordinates always appear in pairs.
- number
-
A decimal number giving the position of the desired character
within the text item.
0 refers to the first character, 1 to the next character, and
so on. If indexes are odd for lines and polygons, they will be
automatically decremented by one.
A number less than 0 is treated as if it were zero, and a
number greater than the length of the text item is treated
as if it were equal to the length of the text item. For
polygons, numbers less than 0 or greater then the length
of the coordinate list will be adjusted by adding or substracting
the length until the result is between zero and the length,
inclusive.
- end
-
Refers to the character or coordinate just after the last one
in the item (same as the number of characters or coordinates
in the item).
- insert
-
Refers to the character just before which the insertion cursor
is drawn in this item. Not valid for lines and polygons.
- sel.first
-
Refers to the first selected character in the item.
If the selection isn't in this item then this form is illegal.
- sel.last
-
Refers to the last selected character in the item.
If the selection isn't in this item then this form is illegal.
- [x,y]
-
Refers to the character or coordinate at the point given by x and
y, where x and y are specified in the coordinate
system of the canvas.
If x and y lie outside the coordinates covered by the
text item, then they refer to the first or last character in the
line that is closest to the given point.
The Tcl string form "@x,y" is also allowed.
Many items support the notion of an dash pattern for outlines.
The first possible syntax is a list of integers. Each element
represents the number of pixels of a line segment. Only the odd
segments are drawn using the "outline" color. The other segments
are drawn transparent.
The second possible syntax is a character list containing only
5 possible characters [.,-_ ], with the first 4 characters
producing a segment of length 1 to 4, respectively, followed
by a transparent segment of length 2. The space can be used
repeatedly to enlarge the space between other line elements
by 1, and can not occur as the first position in the string.
The main difference of this syntax with the previous one is
that it it shape-conserving. This means that all values in the dash
list will be multiplied by the line width before display. This
assures that "." will always be displayed as a dot and "-"
always as a dash regardless of the line width.
Some examples, for a line width of 2:
-dash . = -dash [2,4]
-dash - = -dash [6,4]
-dash -. = -dash [6,4,2,4]
-dash -.. = -dash [6,4,2,4,2,4]
-dash '. ' = -dash [2,8]
-dash ',' = -dash [4,4]
On systems where only a limited set of dash patterns is available,
the dash pattern will be displayed as the closest available dash
pattern. For example, on Windows only the first 4 of the
above examples are available. The last 2 examples will be
displayed identically as the first one.
The Canvas method creates a widget object.
This object supports the configure and cget methods
described in Tk::options which can be used to enquire and
modify the options described above.
The widget also inherits all the methods provided by the generic
Tk::Widget class.
The following additional methods are available for canvas widgets:
- $canvas->addtag(tag, searchSpec, ?arg, arg, ...?)
-
For each item that meets the constraints specified by
searchSpec and the args, add
tag to the list of tags associated with the item if it
isn't already present on that list.
It is possible that no items will satisfy the constraints
given by searchSpec and args, in which case the
method has no effect.
This command returns an empty string as result.
SearchSpec and arg's may take any of the following
forms:
- above tagOrId
-
Selects the item just after (above) the one given by tagOrId
in the display list.
If tagOrId denotes more than one item, then the last (topmost)
of these items in the display list is used.
- all
-
Selects all the items in the canvas.
- below tagOrId
-
Selects the item just before (below) the one given by tagOrId
in the display list.
If tagOrId denotes more than one item, then the first (lowest)
of these items in the display list is used.
- closest x y ?halo? ?start?
-
Selects the item closest to the point given by x and y.
If more than one item is at the same closest distance (e.g. two
items overlap the point), then the top-most of these items (the
last one in the display list) is used.
If halo is specified, then it must be a non-negative
value.
Any item closer than halo to the point is considered to
overlap it.
The start argument may be used to step circularly through
all the closest items.
If start is specified, it names an item using a tag or id
(if by tag, it selects the first item in the display list with
the given tag).
Instead of selecting the topmost closest item, this form will
select the topmost closest item that is below start in
the display list; if no such item exists, then the selection
behaves as if the start argument had not been specified.
- enclosed x1 y1 x2 y2
-
Selects all the items completely enclosed within the rectangular
region given by x1, y1, x2, and y2.
X1 must be no greater then x2 and y1 must be
no greater than y2.
- overlapping x1 y1 x2 y2
-
Selects all the items that overlap or are enclosed within the
rectangular region given by x1, y1, x2,
and y2.
X1 must be no greater then x2 and y1 must be
no greater than y2.
- withtag tagOrId
-
Selects all the items given by tagOrId.
- $canvas->bbox(tagOrId, ?tagOrId, tagOrId, ...?)
-
Returns a list with four elements giving an approximate bounding box
for all the items named by the tagOrId arguments.
The list has the form ``x1 y1 x2 y2'' such that the drawn
areas of all the named elements are within the region bounded by
x1 on the left, x2 on the right, y1 on the top,
and y2 on the bottom.
The return value may overestimate the actual bounding box by
a few pixels.
If no items match any of the tagOrId arguments or if the
matching items have empty bounding boxes (i.e. they have nothing
to display)
then an empty string is returned.
- $canvas->bind(tagOrId?, sequence? ?,callback?)
-
This method associates callback with all the items given by
tagOrId such that whenever the event sequence given by
sequence occurs for one of the items the callback will
be invoked.
This method is similar to the bind method except that
it operates on items in a canvas rather than entire widgets.
See Tk::bind for complete details
on the syntax of sequence and the substitutions performed
on callback before invoking it.
If all arguments are specified then a new binding is created, replacing
any existing binding for the same sequence and tagOrId
(if the first character of command is ``+'' then command
augments an existing binding rather than replacing it).
In this case the return value is an empty string.
If callback is omitted then the method returns the callback
associated with tagOrId and sequence (an error occurs
if there is no such binding).
If both callback and sequence are omitted then the method
returns a list of all the sequences for which bindings have been
defined for tagOrId.
The only events for which bindings may be specified are those related to
the mouse and keyboard (such as Enter, Leave,
ButtonPress, Motion, and KeyPress) or virtual events.
The handling of events in canvases uses the current item defined
in "ITEM IDS AND TAGS" above. Enter and Leave events trigger for an
item when it becomes the current item or ceases to be the current item;
note that these events are different than Enter and Leave
events for windows. Mouse-related events are directed to the current
item, if any. Keyboard-related events are directed to the focus item, if
any (see the focus method below for more on this). If a
virtual event is used in a binding, that binding can trigger only if the
virtual event is defined by an underlying mouse-related or
keyboard-related event.
It is possible for multiple bindings to match a particular event.
This could occur, for example, if one binding is associated with the
item's id and another is associated with one of the item's tags.
When this occurs, all of the matching bindings are invoked.
A binding associated with the all tag is invoked first,
followed by one binding for each of the item's tags (in order),
followed by a binding associated with the item's id.
If there are multiple matching bindings for a single tag,
then only the most specific binding is invoked.
A continue in a callback terminates that
subroutine, and a break method terminates that subroutine
and skips any remaining callbacks for the event, just as for the
bind method.
If bindings have been created for a canvas window using the CanvasBind
method, then they are invoked in addition to bindings created for
the canvas's items using the bind method.
The bindings for items will be invoked before any of the bindings
for the window as a whole.
- $canvas->canvasx(screenx?, gridspacing?)
-
Given a window x-coordinate in the canvas screenx, this method returns
the canvas x-coordinate that is displayed at that location.
If gridspacing is specified, then the canvas coordinate is
rounded to the nearest multiple of gridspacing units.
- $canvas->canvasy(screeny, ?gridspacing?)
-
Given a window y-coordinate in the canvas screeny this method returns
the canvas y-coordinate that is displayed at that location.
If gridspacing is specified, then the canvas coordinate is
rounded to the nearest multiple of gridspacing units.
- $canvas->coords(tagOrId ?x0,y0 ...?)
-
Query or modify the coordinates that define an item.
If no coordinates are specified, this method returns a list
whose elements are the coordinates of the item named by
tagOrId.
If coordinates are specified, then they replace the current
coordinates for the named item.
If tagOrId refers to multiple items, then
the first one in the display list is used.
- $canvas->create(type, x, y, ?x, y, ...?, ?option, value, ...?)
-
Create a new item in $canvas of type type.
The exact format of the arguments after type depends
on type, but usually they consist of the coordinates for
one or more points, followed by specifications for zero or
more item options.
See the subsections on individual item types below for more
on the syntax of this method.
This method returns the id for the new item.
- $canvas->dchars(tagOrId, first, ?last?)
-
For each item given by tagOrId, delete the characters, or coordinates,
in the range given by first and last, inclusive.
If some of the items given by tagOrId don't support
Text items interpret first and last as indices to a character,
line and polygon items interpret them indices to a coordinate (an x,y pair).
within the item(s) as described in "INDICES" above.
If last is omitted, it defaults to first.
This method returns an empty string.
- $canvas->delete(?tagOrId, tagOrId, ...?)
-
Delete each of the items given by each tagOrId, and return
an empty string.
- $canvas->dtag(tagOrId, ?tagToDelete?)
-
For each of the items given by tagOrId, delete the
tag given by tagToDelete from the list of those
associated with the item.
If an item doesn't have the tag tagToDelete then
the item is unaffected by the method.
If tagToDelete is omitted then it defaults to tagOrId.
This method returns an empty string.
- $canvas->find(searchCommand, ?arg, arg, ...?)
-
This method returns a list consisting of all the items that
meet the constraints specified by searchCommand and
arg's.
SearchCommand and args have any of the forms
accepted by the addtag method.
The items are returned in stacking order, with the lowest item first.
- focus
-
- $canvas->focus(?tagOrId?)
-
Set the keyboard focus for the canvas widget to the item given by
tagOrId.
If tagOrId refers to several items, then the focus is set
to the first such item in the display list that supports the
insertion cursor.
If tagOrId doesn't refer to any items, or if none of them
support the insertion cursor, then the focus isn't changed.
If tagOrId is an empty
string, then the focus item is reset so that no item has the focus.
If tagOrId is not specified then the method returns the
id for the item that currently has the focus, or an empty string
if no item has the focus.
Once the focus has been set to an item, the item will display
the insertion cursor and all keyboard events will be directed
to that item.
The focus item within a canvas and the focus window on the
screen (set with the focus method) are totally independent:
a given item doesn't actually have the input focus unless (a)
its canvas is the focus window and (b) the item is the focus item
within the canvas.
In most cases it is advisable to follow the focus widget
method with the CanvasFocus method to set the focus window to
the canvas (if it wasn't there already).
- $canvas->gettags(tagOrId)
-
Return a list whose elements are the tags associated with the
item given by tagOrId.
If tagOrId refers to more than one item, then the tags
are returned from the first such item in the display list.
If tagOrId doesn't refer to any items, or if the item
contains no tags, then an empty string is returned.
- $canvas->icursor(tagOrId, index)
-
Set the position of the insertion cursor for the item(s) given by tagOrId
to just before the character whose position is given by index.
If some or all of the items given by tagOrId don't support
an insertion cursor then this method has no effect on them.
See "INDICES" above for a description of the
legal forms for index.
Note: the insertion cursor is only displayed in an item if
that item currently has the keyboard focus (see the widget
method focus, below), but the cursor position may
be set even when the item doesn't have the focus.
This method returns an empty string.
- $canvas->index(tagOrId, index)
-
This method returns a decimal string giving the numerical index
within tagOrId corresponding to index.
Index gives a textual description of the desired position
as described in "INDICES" above.
Text items interpret index as an index to a character,
line and polygon items interpret it as an index to a coordinate (an x,y pair).
The return value is guaranteed to lie between 0 and the number
of characters, or coordinates, within the item, inclusive.
If tagOrId refers to multiple items, then the index
is processed in the first of these items that supports indexing
operations (in display list order).
- $canvas->insert(tagOrId, beforeThis, string)
-
For each of the items given by tagOrId, if the item supports
text or coordinate, insertion then string is inserted into the item's
text just before the character, or coordinate, whose index is beforeThis.
Text items interpret beforethis as an index to a character,
line and polygon items interpret it as an index to a coordinate (an x,y pair).
For lines and polygons the string must be a valid coordinate
sequence.
See "INDICES" above for information about the forms allowed
for beforeThis.
This method returns an empty string.
- $canvas->itemcget(tagOrId, option)
-
Returns the current value of the configuration option for the
item given by tagOrId whose name is option.
This method is similar to the cget method except that
it applies to a particular item rather than the widget as a whole.
Option may have any of the values accepted by the create
method when the item was created.
If tagOrId is a tag that refers to more than one item,
the first (lowest) such item is used.
- $canvas->itemconfigure(tagOrId, ?option?, ?value?, ?option, value, ...?)
-
This method is similar to the configure method except
that it modifies item-specific options for the items given by
tagOrId instead of modifying options for the overall
canvas widget.
If no option is specified, returns a list describing all of
the available options for the first item given by tagOrId
(see Tk::options for
information on the format of this list). If option is specified
with no value, then the method returns a list describing the
one named option (this list will be identical to the corresponding
sublist of the value returned if no option is specified). If
one or more option-value pairs are specified, then the method
modifies the given widget option(s) to have the given value(s) in
each of the items given by tagOrId; in
this case the method returns an empty string.
The options and values are the same as those permissible
in the create method when the item(s) were created;
see the sections describing individual item types below for details
on the legal options.
- $canvas->lower(tagOrId, ?belowThis?)
-
Move all of the items given by tagOrId to a new position
in the display list just before the item given by belowThis.
If tagOrId refers to more than one item then all are moved
but the relative order of the moved items will not be changed.
BelowThis is a tag or id; if it refers to more than one
item then the first (lowest) of these items in the display list is used
as the destination location for the moved items.
Note: this method has no effect on window items. Window items always
obscure other item types, and the stacking order of window items is
determined by the raise and lower methods of the widget, not the
raise and lower methods for canvases.
This method returns an empty string.
- $canvas->move(tagOrId, xAmount, yAmount)
-
Move each of the items given by tagOrId in the canvas coordinate
space by adding xAmount to the x-coordinate of each point
associated with the item and yAmount to the y-coordinate of
each point associated with the item.
This method returns an empty string.
- $canvas->postscript(?option, value, option, value, ...?)
-
Generate a Postscript representation for part or all of the canvas.
If the -file option is specified then the Postscript is written
to a file and an empty string is returned; otherwise the Postscript
is returned as the result of the method.
If the interpreter that owns the canvas is marked as safe, the operation
will fail because safe interpreters are not allowed to write files.
If the -channel option is specified, the argument denotes the name
of a channel already opened for writing. The Postscript is written to
that channel, and the channel is left open for further writing at the end
of the operation.
The Postscript is created in Encapsulated Postscript form using
version 3.0 of the Document Structuring Conventions.
Note: by default Postscript is only generated for information that
appears in the canvas's window on the screen. If the canvas is
freshly created it may still have its initial size of 1x1 pixel
so nothing will appear in the Postscript. To get around this problem
either invoke the update method to wait for the canvas window
to reach its final size, or else use the -width and -height
options to specify the area of the canvas to print.
The option-value argument pairs provide additional
information to control the generation of Postscript. The following
options are supported:
- -colormap => hashRef
-
HashRef must be a reference to a hash variable or an anonymous hash
that specifies a color mapping to use in the Postscript.
Each value of the hash must consist of Postscript
code to set a particular color value (e.g. ``1.0 1.0 0.0 setrgbcolor'').
When outputting color information in the Postscript, Tk checks
to see if there is a key in the hash with the same
name as the color.
If so, Tk uses the value of the element as the Postscript method
to set the color.
If this option hasn't been specified, or if there isn't a key
in hashRef for a given color, then Tk uses the red, green,
and blue intensities from the X color.
- -colormode => mode
-
Specifies how to output color information. Mode must be either
color (for full color output), gray (convert all colors
to their gray-scale equivalents) or mono (convert all colors
to black or white).
- -file => fileName
-
Specifies the name of the file in which to write the Postscript.
If this option isn't specified then the Postscript is returned as the
result of the method instead of being written to a file.
- -fontmap => hashRef
-
HashRef must be a reference to a hash variable or an anonymous hash
that specifies a font mapping to use in the Postscript.
Each value of the hash must consist of an array reference with
two elements, which are the name and point size of a Postscript font.
When outputting Postscript commands for a particular font, Tk
checks to see if hashRef contains a value with the same
name as the font.
If there is such an element, then the font information contained in
that element is used in the Postscript.
Otherwise Tk attempts to guess what Postscript font to use.
Tk's guesses generally only work for well-known fonts such as
Times and Helvetica and Courier, and only if the X font name does not
omit any dashes up through the point size.
For example, -*-Courier-Bold-R-Normal--*-120-* will work but
*Courier-Bold-R-Normal*120* will not; Tk needs the dashes to
parse the font name).
- -height => size
-
Specifies the height of the area of the canvas to print.
Defaults to the height of the canvas window.
- -pageanchor => anchor
-
Specifies which point of the printed area of the canvas should appear over
the positioning point on the page (which is given by the -pagex
and -pagey options).
For example, -pageanchor=>n means that the top center of the
area of the canvas being printed (as it appears in the canvas window)
should be over the positioning point. Defaults to center.
- -pageheight => size
-
Specifies that the Postscript should be scaled in both x and y so
that the printed area is size high on the Postscript page.
Size consists of a floating-point number followed by
c for centimeters, i for inches, m for millimeters,
or p or nothing for printer's points (1/72 inch).
Defaults to the height of the printed area on the screen.
If both -pageheight and -pagewidth are specified then
the scale factor from -pagewidth is used (non-uniform scaling
is not implemented).
- -pagewidth => size
-
Specifies that the Postscript should be scaled in both x and y so
that the printed area is size wide on the Postscript page.
Size has the same form as for -pageheight.
Defaults to the width of the printed area on the screen.
If both -pageheight and -pagewidth are specified then
the scale factor from -pagewidth is used (non-uniform scaling
is not implemented).
- -pagex => position
-
Position gives the x-coordinate of the positioning point on
the Postscript page, using any of the forms allowed for -pageheight.
Used in conjunction with the -pagey and -pageanchor options
to determine where the printed area appears on the Postscript page.
Defaults to the center of the page.
- -pagey => position
-
Position gives the y-coordinate of the positioning point on
the Postscript page, using any of the forms allowed for -pageheight.
Used in conjunction with the -pagex and -pageanchor options
to determine where the printed area appears on the Postscript page.
Defaults to the center of the page.
- -rotate => boolean
-
Boolean specifies whether the printed area is to be rotated 90
degrees.
In non-rotated output the x-axis of the printed area runs along
the short dimension of the page (``portrait'' orientation);
in rotated output the x-axis runs along the long dimension of the
page (``landscape'' orientation).
Defaults to non-rotated.
- -width => size
-
Specifies the width of the area of the canvas to print.
Defaults to the width of the canvas window.
- -x => position
-
Specifies the x-coordinate of the left edge of the area of the
canvas that is to be printed, in canvas coordinates, not window
coordinates.
Defaults to the coordinate of the left edge of the window.
- -y => position
-
Specifies the y-coordinate of the top edge of the area of the
canvas that is to be printed, in canvas coordinates, not window
coordinates.
Defaults to the coordinate of the top edge of the window.
- $canvas->raise(tagOrId, ?aboveThis?)
-
Move all of the items given by tagOrId to a new position
in the display list just after the item given by aboveThis.
If tagOrId refers to more than one item then all are moved
but the relative order of the moved items will not be changed.
AboveThis is a tag or id; if it refers to more than one
item then the last (topmost) of these items in the display list is used
as the destination location for the moved items.
Note: this method has no effect on window items. Window items always
obscure other item types, and the stacking order of window items is
determined by the raise and lower widget commands, not the
raise and lower methods for canvases.
This method returns an empty string.
- $canvas->scale(tagOrId, xOrigin, yOrigin, xScale, yScale)
-
Rescale all of the items given by tagOrId in canvas coordinate
space.
XOrigin and yOrigin identify the origin for the scaling
operation and xScale and yScale identify the scale
factors for x- and y-coordinates, respectively (a scale factor of
1.0 implies no change to that coordinate).
For each of the points defining each item, the x-coordinate is
adjusted to change the distance from xOrigin by a factor
of xScale.
Similarly, each y-coordinate is adjusted to change the distance
from yOrigin by a factor of yScale.
This method returns an empty string.
- $canvas->scan(option, args)
-
This method is used to implement scanning on canvases. It has
two forms, depending on option:
- $canvas->scanMark(x, y)
-
Records x and y and the canvas's current view; used
in conjunction with later scanDragto method.
Typically this method is associated with a mouse button press in
the widget and x and y are the coordinates of the
mouse. It returns an empty string.
- $canvas->scanDragto(x, y, ?gain?.)
-
This method computes the difference between its x and y
arguments (which are typically mouse coordinates) and the x and
y arguments to the last scanMark method for the widget.
It then adjusts the view by 10 times the
difference in coordinates. This method is typically associated
It then adjusts the view by gain times the
difference in coordinates, where gain defaults to 10.
This command is typically associated
with mouse motion events in the widget, to produce the effect of
dragging the canvas at high speed through its window. The return
value is an empty string.
- $canvas->select(option, ?tagOrId, arg?)
-
Manipulates the selection in one of several ways, depending on
option.
The method may take any of the forms described below.
In all of the descriptions below, tagOrId must refer to
an item that supports indexing and selection; if it refers to
multiple items then the first of
these that supports indexing and the selection is used.
Index gives a textual description of a position
within tagOrId, as described in "INDICES" above.
- $canvas->selectAdjust(tagOrId, index)
-
Locate the end of the selection in tagOrId nearest
to the character given by index, and adjust that
end of the selection to be at index (i.e. including
but not going beyond index).
The other end of the selection is made the anchor point
for future selectTo method calls.
If the selection isn't currently in tagOrId then
this method behaves the same as the selectTo widget
method.
Returns an empty string.
- $canvas->selectClear
-
Clear the selection if it is in this widget.
If the selection isn't in this widget then the method
has no effect.
Returns an empty string.
- $canvas->selectFrom(tagOrId, index)
-
Set the selection anchor point for the widget to be just
before the character
given by index in the item given by tagOrId.
This method doesn't change the selection; it just sets
the fixed end of the selection for future selectTo
method calls.
Returns an empty string.
- $canvas->selectItem
-
Returns the id of the selected item, if the selection is in an
item in this canvas.
If the selection is not in this canvas then an empty string
is returned.
- $canvas->selectTo(tagOrId, index)
-
Set the selection to consist of those characters of tagOrId
between the selection anchor point and
index.
The new selection will include the character given by index;
it will include the character given by the anchor point only if
index is greater than or equal to the anchor point.
The anchor point is determined by the most recent selectAdjust
or selectFrom method calls for this widget.
If the selection anchor point for the widget isn't currently in
tagOrId, then it is set to the same character given
by index.
Returns an empty string.
- $canvas->type(tagOrId)
-
Returns the type of the item given by tagOrId, such as
rectangle or text.
If tagOrId refers to more than one item, then the type
of the first item in the display list is returned.
If tagOrId doesn't refer to any items at all then
an empty string is returned.
- $canvas->xview(?args?)
-
This method is used to query and change the horizontal position of the
information displayed in the canvas's window.
It can take any of the following forms:
- $canvas->xview
-
Returns a list containing two elements.
Each element is a real fraction between 0 and 1; together they describe
the horizontal span that is visible in the window.
For example, if the first element is .2 and the second element is .6,
20% of the canvas's area (as defined by the -scrollregion option)
is off-screen to the left, the middle 40% is visible
in the window, and 40% of the canvas is off-screen to the right.
These are the same values passed to scrollbars via the -xscrollcommand
option.
- $canvas->xviewMoveto(fraction)
-
Adjusts the view in the window so that fraction of the
total width of the canvas is off-screen to the left.
Fraction must be a fraction between 0 and 1.
- $canvas->xviewScroll(number, what)
-
This method shifts the view in the window left or right according to
number and what.
Number must be an integer.
What must be either units or pages or an abbreviation
of one of these.
If what is units, the view adjusts left or right in units
of the xScrollIncrement option, if it is greater than zero,
or in units of one-tenth the window's width otherwise.
If what is pages then the view
adjusts in units of nine-tenths the window's width.
If number is negative then information farther to the left
becomes visible; if it is positive then information farther to the right
becomes visible.
- $canvas->yview(?args?)
-
This method is used to query and change the vertical position of the
information displayed in the canvas's window.
It can take any of the following forms:
- $canvas->yview
-
Returns a list containing two elements.
Each element is a real fraction between 0 and 1; together they describe
the vertical span that is visible in the window.
For example, if the first element is .6 and the second element is 1.0,
the lowest 40% of the canvas's area (as defined by the -scrollregion
option) is visible in the window.
These are the same values passed to scrollbars via the -yscrollcommand
option.
- $canvas->yviewMoveto(fraction)
-
Adjusts the view in the window so that fraction of the canvas's
area is off-screen to the top.
Fraction is a fraction between 0 and 1.
- $canvas->yviewScroll(number, what)
-
This method adjusts the view in the window up or down according to
number and what.
Number must be an integer.
What must be either units or pages.
If what is units, the view adjusts up or down in units
of the yScrollIncrement option, if it is greater than zero,
or in units of one-tenth the window's height otherwise.
If what is pages then
the view adjusts in units of nine-tenths the window's height.
If number is negative then higher information becomes
visible; if it is positive then lower information
becomes visible.
The sections below describe the various types of items supported
by canvas widgets. Each item type is characterized by two things:
first, the form of the create method used to create
instances of the type; and second, a set of configuration options
for items of that type, which may be used in the
create and itemconfigure methods.
Most items don't support indexing or selection or the methods
related to them, such as index and insert.
Where items do support these facilities, it is noted explicitly
in the descriptions below.
At present, text, line and polygon items provide this support.
For lines and polygons the indexing facility is used to manipulate
the coordinates of the item.
Items of type arc appear on the display as arc-shaped regions.
An arc is a section of an oval delimited by two angles (specified
by the -start and -extent options) and displayed in
one of several ways (specified by the -style option).
Arcs are created with methods of the following form:
$canvas->createArc(x1, y1, x2, y2, ?option, value, option, value, ...?)
The arguments x1, y1, x2, and y2 give
the coordinates of two diagonally opposite corners of a
rectangular region enclosing the oval that defines the arc.
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for arcs:
- -dash => pattern
-
- -activedash => pattern
-
- -disableddash => pattern
-
This option specifies dash patterns for the normal state, the active
state, and the disabled state of an arc item.
pattern may have any of the forms accepted by Tk_GetDash.
If the dash options are omitted then the default is a solid outline.
- -dashoffset => offset
-
The starting offset into the pattern provided by the
-dash option.
-dashoffset is ignored if there is no -dash pattern.
- -extent => degrees
-
Specifies the size of the angular range occupied by the arc.
The arc's range extends for degrees degrees counter-clockwise
from the starting angle given by the -start option.
Degrees may be negative.
If it is greater than 360 or less than -360, then degrees
modulo 360 is used as the extent.
- -fill => color
-
- -activefill => color
-
- -disabledfill => color
-
Specifies the color to be used to fill the arc region in its normal, active, and
disabled states,
Color may have any of the forms accepted by Tk_GetColor.
If color is an empty string (the default), then
then the arc will not be filled.
- -outline => color
-
- -activeoutline => color
-
- -disabledoutline => color
-
This option specifies the color that should be used to draw the
outline of the arc in its normal, active and disabled states.
Color may have any of the forms accepted by Tk_GetColor.
This option defaults to black. If color is specified
as undef then no outline is drawn for the arc.
- -outlinestipple => bitmap
-
- -activeoutlinestipple => bitmap
-
- -disabledoutlinestipple => bitmap
-
This option specifies stipple patterns that should be used to draw the
outline of the arc in its normal, active and disabled states.
Indicates that the outline for the arc should be drawn with a stipple pattern;
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If the -outline option hasn't been specified then this option
has no effect.
If bitmap is an empty string (the default), then the outline is drawn
in a solid fashion.
- -start => degrees
-
Specifies the beginning of the angular range occupied by the
arc.
Degrees is given in units of degrees measured counter-clockwise
from the 3-o'clock position; it may be either positive or negative.
- -state => state
-
Modifies the state of the arc item where state may be set to one of:
normal, disabled, hidden or "". If set to empty, the state of the canvas
itself is used. An arc item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -stipple => bitmap
-
- -activestipple => bitmap
-
- -disabledstipple => bitmap
-
This option specifies stipple patterns that should be used to fill the
the arc in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If the -fill option hasn't been specified then this option
has no effect.
If bitmap is an empty string (the default), then filling is done
in a solid fashion.
- -style => type
-
Specifies how to draw the arc. If type is pieslice
(the default) then the arc's region is defined by a section
of the oval's perimeter plus two line segments, one between the center
of the oval and each end of the perimeter section.
If type is chord then the arc's region is defined
by a section of the oval's perimeter plus a single line segment
connecting the two end points of the perimeter section.
If type is arc then the arc's region consists of
a section of the perimeter alone.
In this last case the -fill option is ignored.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the arc item is updated on the screen.
- -width => outlineWidth
-
- -activewidth => outlineWidth
-
- -disabledwidth => outlineWidth
-
Specifies the width of the outline to be drawn around
the arc's region, in its normal, active and disabled states.
outlineWidth may be in any of the forms described in
the "COORDINATES" section above.
If the -outline option has been specified as undef
then this option has no effect.
Wide outlines will be drawn centered on the edges of the arc's region.
This option defaults to 1.0.
Items of type bitmap appear on the display as images with
two colors, foreground and background.
Bitmaps are created with methods of the following form:
$canvas->createBitmap(x, y, ?option, value, option, value, ...?)
The arguments x and y specify the coordinates of a
point used to position the bitmap on the display (see the -anchor
option below for more information on how bitmaps are displayed).
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for bitmaps:
- -anchor => anchorPos
-
AnchorPos tells how to position the bitmap relative to the
positioning point for the item; it may have any of the forms
accepted by Tk_GetAnchor. For example, if anchorPos
is center then the bitmap is centered on the point; if
anchorPos is n then the bitmap will be drawn so that
its top center point is at the positioning point.
This option defaults to center.
- -background => color
-
- -activebackground => color
-
- -disabledbackground => color
-
Specifies the color to use for each of the bitmap's '0' valued pixels
in its normal, active and disabled states.
Color may have any of the forms accepted by Tk_GetColor.
If this option isn't specified, or if it is specified as undef,
then nothing is displayed where the bitmap pixels are 0; this
produces a transparent effect.
- -bitmap => bitmap
-
- -activebitmap => bitmap
-
- -disabledbitmap => bitmap
-
Specifies the bitmaps to display in the item in its normal, active and
disabled states. All bitmaps must have the same width and height.
Bitmap may have any of the forms accepted by Tk_GetBitmap.
- -foreground => color
-
- -activeforeground => color
-
- -disabledforeground => color
-
Specifies the color to use for each of the bitmap's '1' valued pixels
in its normal, active and disabled states.
Color may have any of the forms accepted by Tk_GetColor and
defaults to black.
- -state => state
-
Modifies the state of the bitmap item where state may be set to one of:
normal, disabled, or hidden. An bitmap item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the bitmap item is updated on the screen.
Items of type grid are intended for producing a visual reference for
interpreting other items. They can be drawn as either lines (with dash
style) or as rectangular "dots" at each grid point.
Items of type grid are unlike other items they always cover the
whole of the canvas, but are never enclosed by nor overlap any area
and are not near any point. That is they are intended to be always visible
but not "pickable", as such they do support the "active" state.
They are like other items in that: multiple
grids are permitted, they can be raised and lowered relative to other
items, they can be moved and scaled. As yet grids do not apear in
PostScript output.
Grids have outline like configure options. Grids are created with methods of the
following form:
$canvas->createGrid(x1, y1, x2, y2, ?option, value, option, value, ...?)
The arguments x1, y1 give the origin of the grid. x2, and y2 give
the coordinates of the next grid point in their respective directions.
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for grids:
- -lines => boolean
-
If -lines is set to a true value then lines are drawn for both X and Y
grids in the style determined by -dash. Otherwise retangular "dots"
are drawn at each grid point.
- -dash => pattern
-
- -disableddash => pattern
-
This option specifies dash patterns for the normal state,
and the disabled state of a grid item.
pattern may have any of the forms accepted by Tk_GetDash.
If the dash options are omitted then the default is a solid outline.
- -dashoffset => offset
-
The starting offset into the pattern provided by the
-dash option.
-dashoffset is ignored if there is no -dash pattern.
- -color => color
-
- -disabledcolor => color
-
This option specifies the color that should be used to draw the
outline of the grid in its normal and disabled states.
Color may have any of the forms accepted by Tk_GetColor.
This option defaults to black.
If color is undef then no grid will be drawn.
- -stipple => bitmap
-
- -disabledstipple => bitmap
-
This option specifies stipple patterns that should be used to draw the
outline of the rectangle in its normal and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If bitmap is an empty string (the default), then the outline is drawn
in a solid fashion.
- -state => state
-
Modifies the state of the rectangle item where state may be set to one of:
normal, disabled, or hidden. Many options can take
separate specifications in normal and disabled states such that the
appearance of the item can be different in each state.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the grid item is updated on the screen.
- -width => outlineWidth
-
- -disabledwidth => outlineWidth
-
Specifies the width of the lines drawn by the grid or the size (in both X and Y)
of the dots, in its normal and disabled states.
This option defaults to 1.0.
Items of type image are used to display images on a
canvas.
Images are created with methods of the following form:
$canvas->createImage(x, y, ?option, value, option, value, ...?)
The arguments x and y specify the coordinates of a
point used to position the image on the display (see the -anchor
option below for more information).
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for images:
- -anchor => anchorPos
-
AnchorPos tells how to position the image relative to the
positioning point for the item; it may have any of the forms
accepted by Tk_GetAnchor. For example, if anchorPos
is center then the image is centered on the point; if
anchorPos is n then the image will be drawn so that
its top center point is at the positioning point.
This option defaults to center.
- -image => name
-
- -activeimage => name
-
- -disabledimage => name
-
Specifies the name of the images to display in the item in is normal,
active and disabled states. This image must have been created
previously, see Tk::Image.
- -state => state
-
Modifies the state of the image item where state may be set to one of:
normal, disabled, or hidden. An image item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item; it may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the image item is updated on the screen.
Items of type line appear on the display as one or more connected
line segments or curves.
Line items support coordinate indexing operations using the canvas
methods: dchars, index, insert.
Lines are created with methods of the following form:
$canvas->createLine(x1, y1..., xn, yn, ?option, value, option, value, ...?)
The arguments x1 through yn give
the coordinates for a series of two or more points that describe
a series of connected line segments.
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for lines:
- -arrow => where
-
Indicates whether or not arrowheads are to be drawn at one or both
ends of the line.
Where must have one of the values none (for no arrowheads),
first (for an arrowhead at the first point of the line),
last (for an arrowhead at the last point of the line), or
both (for arrowheads at both ends).
This option defaults to none.
- -arrowshape => shape
-
This option indicates how to draw arrowheads.
The shape argument must be a list with three elements, each
specifying a distance in any of the forms described in
the "COORDINATES" section above.
The first element of the list gives the distance along the line
from the neck of the arrowhead to its tip.
The second element gives the distance along the line from the
trailing points of the arrowhead to the tip, and the third
element gives the distance from the outside edge of the line to the
trailing points.
If this option isn't specified then Tk picks a ``reasonable'' shape.
- -capstyle => style
-
Specifies the ways in which caps are to be drawn at the endpoints
of the line.
Style may have any of the forms accepted by Tk_GetCapStyle
(butt, projecting, or round).
If this option isn't specified then it defaults to butt.
Where arrowheads are drawn the cap style is ignored.
- -dash => pattern
-
- -activedash => pattern
-
- -disableddash => pattern
-
This option specifies dash patterns for the normal state, the active
state, and the disabled state of a line item.
pattern may have any of the forms accepted by Tk_GetDash.
If the dash options are omitted then the default is a solid outline.
- -dashoffset => offset
-
The starting offset into the pattern provided by the
-dash option.
-dashoffset is ignored if there is no -dash pattern.
- -fill => color
-
- -activefill => color
-
- -disabledfill => color
-
Specifies the color to be used to fill the line in its normal, active, and
disabled states.
Color may have
any of the forms acceptable to Tk_GetColor. It may also be undef,
in which case the line will be transparent.
This option defaults to black.
- -joinstyle => style
-
Specifies the ways in which joints are to be drawn at the vertices
of the line.
Style may have any of the forms accepted by Tk_GetCapStyle
(bevel, miter, or round).
If this option isn't specified then it defaults to miter.
If the line only contains two points then this option is
irrelevant.
- -smooth => boolean
-
Boolean must have one of the forms accepted by Tk_GetBoolean.
It indicates whether or not the line should be drawn as a curve.
If so, the line is rendered as a set of parabolic splines: one spline
is drawn for the first and second line segments, one for the second
and third, and so on. Straight-line segments can be generated within
a curve by duplicating the end-points of the desired line segment.
- -splinesteps => number
-
Specifies the degree of smoothness desired for curves: each spline
will be approximated with number line segments. This
option is ignored unless the -smooth option is true.
- -state => state
-
Modifies the state of the line item where state may be set to one of:
normal, disabled, or hidden. A line item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -stipple => bitmap
-
- -activestipple => bitmap
-
- -disabledstipple => bitmap
-
This option specifies stipple patterns that should be used to fill the
the line in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If bitmap is an empty string (the default), then filling is
done in a solid fashion.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the line item is updated on the screen.
- -width => lineWidth
-
- -activewidth => lineWidth
-
- -disabledwidth => lineWidth
-
Specifies the width of the line
in its normal, active and disabled states.
lineWidth may be in any of the forms
described in the "COORDINATES" section above.
Wide lines will be drawn centered on the path specified by the
points.
If this option isn't specified then it defaults to 1.0.
Items of type oval appear as circular or oval regions on
the display. Each oval may have an outline, a fill, or
both. Ovals are created with methods of the
following form:
$canvas->createOval(x1, y1, x2, y2, ?option, value, option, value, ...?)
The arguments x1, y1, x2, and y2 give
the coordinates of two diagonally opposite corners of a
rectangular region enclosing the oval.
The oval will include the top and left edges of the rectangle
not the lower or right edges.
If the region is square then the resulting oval is circular;
otherwise it is elongated in shape.
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for ovals:
- -dash => pattern
-
- -activedash => pattern
-
- -disableddash => pattern
-
This option specifies dash patterns for the normal state, the active
state, and the disabled state of an oval item.
pattern may have any of the forms accepted by Tk_GetDash.
If the dash options are omitted then the default is a solid outline.
- -dashoffset => offset
-
The starting offset into the pattern provided by the
-dash option.
-dashoffset is ignored if there is no -dash pattern.
- -fill => color
-
- -activefill => color
-
- -disabledfill => color
-
Specifies the color to be used to fill the oval in its normal, active, and
disabled states.
Color may have any of the forms accepted by Tk_GetColor.
If color is undef (the default), then
then the oval will not be filled.
- -outline => color
-
- -activeoutline => color
-
- -disabledoutline => color
-
This option specifies the color that should be used to draw the
outline of the oval in its normal, active and disabled states.
Color may have any of the forms accepted by Tk_GetColor.
This option defaults to black.
If color is undef then no outline will be
drawn for the oval.
- -outlinestipple => bitmap
-
- -activeoutlinestipple => bitmap
-
- -disabledoutlinestipple => bitmap
-
This option specifies stipple patterns that should be used to draw the
outline of the oval in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If the -outline option hasn't been specified then this option
has no effect.
If bitmap is an empty string (the default), then the outline is drawn
in a solid fashion.
- -state => state
-
Modifies the state of the oval item where state may be set to one of:
normal, disabled, or hidden. An oval item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -stipple => bitmap
-
- -activestipple => bitmap
-
- -disabledstipple => bitmap
-
This option specifies stipple patterns that should be used to fill the
the oval in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If the -fill option hasn't been specified then this option
has no effect.
If bitmap is an empty string (the default), then filling is done
in a solid fashion.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the oval item is updated on the screen.
- -width => outlineWidth
-
- -activewidth => outlineWidth
-
- -disabledwidth => outlineWidth
-
Specifies the width of the outline to be drawn around
the oval, in its normal, active and disabled states.
outlineWidth specifies the width of the outline to be drawn around
the oval, in any of the forms described in the "COORDINATES" section above.
If the -outline option hasn't been specified then this option
has no effect.
Wide outlines are drawn centered on the oval path defined by
x1, y1, x2, and y2.
This option defaults to 1.0.
Items of type polygon appear as polygonal or curved filled regions
on the display.
Polygon items support coordinate indexing operations using the canvas
methods: dchars, index, insert.
Polygons are created with methods of the following form:
$canvas->createPolygon(x1, y1, ..., xn, yn, ?option, value, option, value, ...?)
The arguments x1 through yn specify the coordinates for
three or more points that define a closed polygon.
The first and last points may be the same; whether they are or not,
Tk will draw the polygon as a closed polygon.
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for polygons:
- -dash => pattern
-
- -activedash => pattern
-
- -disableddash => pattern
-
This option specifies dash patterns for the normal state, the active
state, and the disabled state of an polygon item.
pattern may have any of the forms accepted by Tk_GetDash.
If the dash options are omitted then the default is a solid outline.
- -dashoffset => offset
-
The starting offset into the pattern provided by the
-dash option.
-dashoffset is ignored if there is no -dash pattern.
- -fill => color
-
- -activefill => color
-
- -disabledfill => color
-
Specifies the color to be used to fill the polygon in its normal, active, and
disabled states.
Color
may have any of the forms acceptable to Tk_GetColor.
If color is undef then the polygon will be
transparent.
This option defaults to black.
- -joinstyle => style
-
Specifies the ways in which joints are to be drawn at the vertices
of the outline.
Style may have any of the forms accepted by Tk_GetCapStyle
(bevel, miter, or round).
If this option isn't specified then it defaults to miter.
- -outline => color
-
- -activeoutline => color
-
- -disabledoutline => color
-
This option specifies the color that should be used to draw the
outline of the polygon in its normal, active and disabled states.
Color may have any of the forms accepted by Tk_GetColor.
If color is undef then no outline will be
drawn for the polygon.
This option defaults to undef (no outline).
- -outlinestipple => bitmap
-
- -activeoutlinestipple => bitmap
-
- -disabledoutlinestipple => bitmap
-
This option specifies stipple patterns that should be used to draw the
outline of the polygon in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If the -outline option hasn't been specified then this option
has no effect.
If bitmap is an empty string (the default), then the outline is drawn
in a solid fashion.
- -smooth => boolean
-
Boolean must have one of the forms accepted by Tk_GetBoolean
It indicates whether or not the polygon should be drawn with a
curved perimeter.
If so, the outline of the polygon becomes a set of parabolic splines,
one spline for the first and second line segments, one for the second
and third, and so on. Straight-line segments can be generated in a
smoothed polygon by duplicating the end-points of the desired line segment.
- -splinesteps => number
-
Specifies the degree of smoothness desired for curves: each spline
will be approximated with number line segments. This
option is ignored unless the -smooth option is true.
- -state => state
-
Modifies the state of the polygon item where state may be set to one of:
normal, disabled, or hidden. A polygon item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -stipple => bitmap
-
- -activestipple => bitmap
-
- -disabledstipple => bitmap
-
This option specifies stipple patterns that should be used to fill the
the polygon in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If bitmap is an empty string (the default), then filling is
done in a solid fashion.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the polygon item is updated on the screen.
- -width => outlineWidth
-
- -activewidth => outlineWidth
-
- -disabledwidth => outlineWidth
-
- Specifies the width of the outline to be drawn around
-
the polygon, in its normal, active and disabled states.
outlineWidth may be in any of the forms described in the COORDINATES
section above.
OutlineWidth specifies the width of the outline to be drawn around
the polygon, in any of the forms described in the "COORDINATES" section above.
If the -outline option hasn't been specified then this option
has no effect. This option defaults to 1.0.
Polygon items are different from other items such as rectangles, ovals
and arcs in that interior points are considered to be ``inside'' a
polygon (e.g. for purposes of the find closest and
find overlapping methods) even if it is not filled.
For most other item types, an
interior point is considered to be inside the item only if the item
is filled or if it has neither a fill nor an outline. If you would
like an unfilled polygon whose interior points are not considered
to be inside the polygon, use a line item instead.
Items of type rectangle appear as rectangular regions on
the display. Each rectangle may have an outline, a fill, or
both. Rectangles are created with methods of the
following form:
$canvas->createRectangle(x1, y1, x2, y2, ?option, value, option, value, ...?)
The arguments x1, y1, x2, and y2 give
the coordinates of two diagonally opposite corners of the rectangle
(the rectangle will include its upper and left edges but not
its lower or right edges).
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for rectangles:
- -dash => pattern
-
- -activedash => pattern
-
- -disableddash => pattern
-
This option specifies dash patterns for the normal state, the active
state, and the disabled state of a rectangle item.
pattern may have any of the forms accepted by Tk_GetDash.
If the dash options are omitted then the default is a solid outline.
- -dashoffset => offset
-
The starting offset into the pattern provided by the
-dash option.
-dashoffset is ignored if there is no -dash pattern.
- -fill => color
-
- -activefill => color
-
- -disabledfill => color
-
Specifies the color to be used to fill the rectangle in its normal, active, and
disabled states.
Color
may be specified in any of the forms accepted by Tk_GetColor.
If color is undef (the default),
then the rectangle will not be filled.
- -outline => color
-
- -activeoutline => color
-
- -disabledoutline => color
-
This option specifies the color that should be used to draw the
outline of the rectangle in its normal, active and disabled states.
Color may have any of the forms accepted by Tk_GetColor.
This option defaults to black.
If color is undef then no outline will be
drawn for the rectangle.
- -outlinestipple => bitmap
-
- -activeoutlinestipple => bitmap
-
- -disabledoutlinestipple => bitmap
-
This option specifies stipple patterns that should be used to draw the
outline of the rectangle in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If the -outline option hasn't been specified then this option
has no effect.
If bitmap is an empty string (the default), then the outline is drawn
in a solid fashion.
- -state => state
-
Modifies the state of the rectangle item where state may be set to one of:
normal, disabled, or hidden. A rectangle item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -stipple => bitmap
-
- -activestipple => bitmap
-
- -disabledstipple => bitmap
-
This option specifies stipple patterns that should be used to fill the
the rectangle in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If the -fill option hasn't been specified then this option
has no effect.
If bitmap is an empty string (the default), then filling
is done in a solid fashion.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the rectangle item is updated on the screen.
- -width => outlineWidth
-
- -activewidth => outlineWidth
-
- -disabledwidth => outlineWidth
-
Specifies the width of the outline to be drawn around
the rectangle, in its normal, active and disabled states.
OutlineWidth specifies the width of the outline to be drawn around
the rectangle, in any of the forms described in the "COORDINATES" section above.
If the -outline option hasn't been specified then this option
has no effect.
Wide outlines are drawn centered on the rectangular path
defined by x1, y1, x2, and y2.
This option defaults to 1.0.
A text item displays a string of characters on the screen in one
or more lines.
Text items support indexing and selection, along with the
following text-related canvas methods: dchars,
focus, icursor, index, insert,
select.
Text items are created with methods of the following
form:
$canvas->createText(x, y, ?option, value, option, value, ...?)
The arguments x and y specify the coordinates of a
point used to position the text on the display (see the options
below for more information on how text is displayed).
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure methods to change the item's
configuration.
The following options are supported for text items:
- -anchor => anchorPos
-
AnchorPos tells how to position the text relative to the
positioning point for the text; it may have any of the forms
accepted by Tk_GetAnchor. For example, if anchorPos
is center then the text is centered on the point; if
anchorPos is n then the text will be drawn such that
the top center point of the rectangular region occupied by the
text will be at the positioning point.
This option defaults to center.
- -fill => color
-
- -activefill => color
-
- -disabledfill => color
-
Specifies the color to be used to fill the text in its normal, active, and
disabled states.
Color may have any of the forms accepted by Tk_GetColor.
If color is undef then the text will be transparent.
If this option isn't specified then it defaults to black.
- -font => fontName
-
Specifies the font to use for the text item.
FontName may be any string acceptable to Tk_GetFontStruct.
If this option isn't specified, it defaults to a system-dependent
font.
- -justify => how
-
Specifies how to justify the text within its bounding region.
How must be one of the values left, right,
or center.
This option will only matter if the text is displayed as multiple
lines.
If the option is omitted, it defaults to left.
- -state => state
-
Modifies the state of the text item where state may be set to one of:
normal, disabled, or hidden. A text item may also be in the "active"
state if the mouse is currently over it. Many options can take
separate specifications in normal, active and disabled states such that the
appearance of the item can be different in each state.
- -stipple => bitmap
-
- -activestipple => bitmap
-
- -disabledstipple => bitmap
-
This option specifies stipple patterns that should be used to fill the
the text in its normal, active and disabled states.
bitmap specifies the stipple pattern to use, in any of the
forms accepted by Tk_GetBitmap.
If bitmap is an empty string (the default) then the text
is drawn in a solid fashion.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -text => string
-
String specifies the characters to be displayed in the text item.
Newline characters cause line breaks.
The characters in the item may also be changed with the
insert and delete methods.
This option defaults to an empty string.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the text item is updated on the screen.
- -width => lineLength
-
Specifies a maximum line length for the text, in any of the forms
described in the "COORDINATES" section above.
If this option is zero (the default) the text is broken into
lines only at newline characters.
However, if this option is non-zero then any line that would
be longer than lineLength is broken just before a space
character to make the line shorter than lineLength; the
space character is treated as if it were a newline
character.
Items of type window cause a particular window to be displayed
at a given position on the canvas.
Window items are created with methods of the following form:
$canvas->createWindow(x, y?, -option=>value, -option=>value, ...?)
The arguments x and y specify the coordinates of a
point used to position the window on the display (see the -anchor
option below for more information on how bitmaps are displayed).
After the coordinates there may be any number of option-value
pairs, each of which sets one of the configuration options
for the item. These same option-value pairs may be
used in itemconfigure method to change the item's
configuration.
The following options are supported for window items:
- -anchor => anchorPos
-
AnchorPos tells how to position the window relative to the
positioning point for the item; it may have any of the forms
accepted by Tk_GetAnchor. For example, if anchorPos
is center then the window is centered on the point; if
anchorPos is n then the window will be drawn so that
its top center point is at the positioning point.
This option defaults to center.
- -height => pixels
-
Specifies the height to assign to the item's window.
Pixels may have any of the
forms described in the "COORDINATES" section above.
If this option isn't specified, or if it is specified as an empty
string, then the window is given whatever height it requests internally.
- -state => state
-
Modifies the state of the window item where state may be set to one of:
normal, disabled, or hidden.
- -tags => tagList
-
Specifies a set of tags to apply to the item.
TagList consists of a list of tag names, which replace any
existing tags for the item.
TagList may be an empty list.
- -updatecommand => command
-
Specifies a callback that is to be executed every time
the window item is updated on the screen.
- -width => pixels
-
Specifies the width to assign to the item's window.
Pixels may have any of the
forms described in the "COORDINATES" section above.
If this option isn't specified, or if it is specified as an empty
string, then the window is given whatever width it requests internally.
- -window => $widget
-
Specifies the window to associate with this item.
The window specified by $widget must either be a child of
the canvas widget or a child of some ancestor of the canvas widget.
PathName may not refer to a top-level window.
Note: due to restrictions in the ways that windows are managed, it is not
possible to draw other graphical items (such as lines and images) on top
of window items. A window item always obscures any graphics that
overlap it, regardless of their order in the display list.
It is possible for individual applications to define new item
types for canvas widgets using C code.
See the documentation for Tk_CreateItemType.
Canvas has default bindings to allow scrolling if necessary:
<Up>, <Down>, <Left> and <Right> (and their <Control-*> counter
parts). Further <Proir>, <Next>, <Home> and <End>. These
bindings allow you to navigate the same way as in other
widgets that can scroll.
The following methods are added as perl code:
- $canvas->get_corners
-
Returns the bounding box in Canvas coordinates of the visible portion
of the Canvas. (Written by Slaven Rezic.)
Tk's canvas widget is a blatant ripoff of ideas from Joel Bartlett's
ezd program. Ezd provides structured graphics in a Scheme
environment and preceded canvases by a year or two. Its simple
mechanisms for placing and animating graphical objects inspired the
functions of canvases.
canvas, widget